Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet Flapper Won't Drop
[ 2 Answers ]
When flushed, my toilet flapper immediately raises to a 45 degree angle, but then it will not drop completely unless the handle outside the tank is pulled up (jiggling does not solve it). It drops partially, but then the chain is tight and it is does not drop further. Once you pull up the handle,...
Toilet flapper not flapping properly
[ 3 Answers ]
Hi all, I live in a condo and have 2 toilets in my unit. Both were flushing fine until I replaced one of the flush lever/arm from a plastic one to a chrome one. Now, I can't seem to adjust the chain properly to get the flapper to function properly. I observed the toilet that flushes properly...
Flapper on Toilet - fixed it, but still have a ?
[ 2 Answers ]
OK, I'm putting on my plumbing cap today! One of our toilets was constantly making a running water sound. When I opened it up, it appeared to me that the Flapper was very old and that was where the water was leaking into. I replaced the new flapper successfully (it was pretty easy! ) and now the...
Probably a boring question: Flapper sticking in toilet
[ 1 Answers ]
The flapper in the toilet is sticking in the open position causing the toilet to run (unless someone jiggles the handle to get the flapper to close). The chain was twisted around the handle, but has since been fixed. The flapper continues to stick for no apparent reason. Suggestions? Thanks.
Flapper closes to soon
[ 4 Answers ]
I have a low flush toilet that has a problem. When you flush it instead of pushing the handle down and walking away you have to stand there and wait for the water to drain. I took the tank top off and looked in side. This is the kind of toilet that has the floater that is a cylinder on the input... View more questions Search
|