 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs & Stratton 5 HP Engine won't start.
The engine is a model 132232-4036-02 and has run fine on my pressure washer for a long time. It won't run now and I have checked the spark and compression which are fine and also cleaned out the fuel tank. Replaced spark plug, installed new filter and pre-filter and added new fuel. It sounds like it wants to run but it just won't start. I have added fuel to the carb and it still won't start. Any suggestions.
|
||||
Check out some similar questions!
I recently got a used Craftsman lawn tractor with 15.5 HP turbo OHV Briggs & Stratton engine. It does not start - it cranks, engine turns (when I take out the spark plug, I can feel puffs of air coming out), but the engine does not catch on. I have put in a new battery, cleaned air filter, put in...
I've got a B&S 12.5 riding mower that absolutely will not fire up! This thing will spin like there's no tommrow but won't fire for anything! We've looked at the plug and it's fine.Battery is good or it wouldn't spin like it does.The serpintine belt was off so we put it back on and it seems to be...
My Sears mower has a 15.5 briggs and stratton engine that is 6 years old and is having trouble starting. Sometimes when I turn the key, the motor will turn 3/4 of rev and stop due to hard compression. I can hand turn the engine past this sport sometimes and the engine will begin to turn over. Even...
I have an 1998 Ingersoll 4016 with a 16 HP Vanguard engine. When I try to start it, it sounds and feels like the starter is spinning but not engaging the flywheel. I have not had any problems starting until now. It has about 220 hours.
View more questions Search
Add your answer here.
|
