 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2004 PoulanPro riding mower stalls when blades engage
My Poulan PRO needs to be jumped all the time to start and then only sometimes do the blades engage. If they engage they only stay on for a few minutes then they shut off. A few minutes later the mower stalls and needs to be jumped again. It has a Kohler Command 25 engine. I've replaced the battery and the stator. While idling, the battery reads 13 volts. After it dies battery reads around 11.75v but doesn't try to start or make any noise.
|
||||
Check out some similar questions!
Replaced battery with new one, within several starts the new battery was drained. Mower will start by jumping but only runs a few minutes then dies, also the PTO will not engage at all (replaced PTO switch and still won't engage) does not even attempt to engage, as if there is no power to the...
I have a weedeater riding mower that I just bought second hand. I replaced the fan belt when I first got it and just repaired the right rear tire. Since putting the tire back on I have not been able to get the mower to move in any gear. The fan belt looks loose, but the drive shaft is turning. ...
When I pull the blade switch on my Craftsman 16.5 hp riding mower, nothing happens. I had this problem previously, and it was the PTO. Since that was a year ago, I really don't think it's that. Recently when the blades wouldn't engage, I checked/wiggled the wiring to the PTO, and the blades did...
PTO not engaging
I have a Lowe's MTD mower. The blades will not engage.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
