Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs & Stratton 14.5hp OHV - Won't Run
[ 8 Answers ]
I have a yard machine mower that was running great. It shut off in the middle of cutting and that was that. If I pour gas in the carb it tries to start, so I know I have fire. I have plenty of gas going to the carb and the solenoid on the bottom is working fine. I had the carb off, took the main...
12.5hp I/C Briggs&Stratton engine
[ 3 Answers ]
I went to start my riding mower for the first time this year and when it started is smoked real bad. I turned it off and checked the oil, it was over filled. I went to drain the oil and discovered it had gas in the oil. It ran fine last year, but I didn't drain the gas out at the end of the season....
Briggs & Stratton 10.5hp ignition circuit
[ 1 Answers ]
Hello and greetings from New Zealand. I am wanting to fit a key activated ignition switch on to my B&S 10.5hp rear engine rider. The current systems is just a push button kill switch and a manually operated solenoid for the starting. As I have grand kids running around the yard on a regular basis...
19.5hp briggs & stratton twin cylindler
[ 2 Answers ]
I have gas shooting out the carburetor I need help
Briggs & Stratton 14.5hp Flywheel ring
[ 1 Answers ]
Today we put on a new flywheel ring gear and a new starter pinion gear. The new flywheel ring is aluminum instead of the plastic that was on it. I was told this was due to the starter gear being easier to replace it will be the first to be worn down. We tried starting the tractor and the starter... View more questions Search
|