Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Advice needed on framing - replace metal studs?
[ 2 Answers ]
I am looking for some advice regarding a "Yoga RopeWall" I am helping to construct for a friend's Yoga studio. A rope wall is basically a wall of 3/4" plywood with ropes hanging from it that are used for various Yoga poses. Originally, the wall was covered in mirror. When we took that down, we...
Quick framing question
[ 9 Answers ]
I am building a wall to replace the garage door in my basement. I will be using 2x6 lumber for the framing. What is the recommended spacing for the studs? The width is 8' with a 36" door in the center. After the width of the pre-hung door frame and the two studs beside it and the stud...
New framing on old wall
[ 2 Answers ]
I am about to undertake some remodeling on my master bath and let me explain the setup first. From my master bad to the sink area of the bathroom there is a half wall with 2 supports because it is a load bearing wall. I want to tear this out and put a pocket door in and make the wall a full one. ...
Need advice on which Framing Nailer to buy
[ 1 Answers ]
My father and immediate family are buidling several houses in years to come, their just completing one now. He has asked me about framing nailers since he's still doing it the old fashion way and well - this is not so easy for a fella with a few miles on them ;) Can anyone give me some models or...
Wood or Metal framing for my basement
[ 1 Answers ]
Hi Everyone, I am in the planning stages of finishing my basement. My question is whether I should use wood or metal for the stud walls. Everything I've read indicates that metal is much easier to work with and, while researching the price of lumber and the metal studs, I discovered that there... View more questions Search
|