Ask Experts Questions for FREE Help !
Ask
    caper33's Avatar
    caper33 Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 6, 2003, 12:49 PM
    Ink jet printers
    ?? I've had 3 computers and have had 3 printers and HAVE USED WIND. 98, 98se AND NOW Xp . My printers were Lexmark Z22, cannon i320 and Hp 3322. In each case they all print approx. 33% smaller then what shows on the monitor! Is this simply a fact that all printers print 33% smaller or is it something that I could correct. I am presently using a Compaq 5000 with windows Xp and a HP 3322 printer. I just printed a photo off the internet and as always, it is quite a bit smaller then what was shown on the monitor. No one seems to know the answer. Help??
    Bill K
    elina's Avatar
    elina Posts: 136, Reputation: 1
    Junior Member
     
    #2

    Nov 7, 2003, 06:29 AM
    Re: ink jet printers
    Caper, these sites explain the problem best:

    http://www.scantips.com/basics1c.html


    http://style.cleverchimp.com/font_size/points/dump.html

    (explained in middle of page)


    http://web.uvic.ca/comped/online/pshop/

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to network printers? [ 2 Answers ]

Ok, here is my setup... I have 2 desktop PC's, one I use as a "server" the other is for personal use. I also of 3 wireless laptops that are for personal use. I currently have 3 printers and they are hooked up to the "server". I would like to know if I can and how I can use all three printers on all...

Multiple printers [ 15 Answers ]

I am trying to hook multiple printers up on one system. If they are both usb then I can hook them up and then share them and it won't be a problem when another system uses either printer. Is this correct. Also if I have to use a switch is there one that will do the switching automatically or will...

Canon All-In-One printers [ 1 Answers ]

I have recently had a problem with a Canon MP700. Everything worked beautifuly except the scanning function. I reinstalled the drivers exactly how the instructions asked, reinstalled the scanner and usb composite device separately, reinstalled the software, tested the printer on a different...

Printers [ 1 Answers ]

:(Hello Everyone) Anyone I am having a real rough time trying to figure this one out, Loaded a firmware on my printer, and now it's sending characters we do not understand, we talked to a tech, and he explained to us that the firmware that was loaded had brain washed the printer into believe that...


View more questions Search