Ask Experts Questions for FREE Help !
Ask
    Maximumbob's Avatar
    Maximumbob Posts: 2, Reputation: 1
    New Member
     
    #1

    May 18, 2019, 08:24 AM
    Polaris
    Runs slow and tail doesn’t move
    Maximumbob's Avatar
    Maximumbob Posts: 2, Reputation: 1
    New Member
     
    #2

    May 18, 2019, 08:30 AM
    Polaris vacuum
    Running slow

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Polaris 250 blazer [ 1 Answers ]

Not starting ,fuel going to bottom of crankcase instead of spark plug , spark plug dry,

Polaris Global [ 4 Answers ]

Here is a question regarding MLM Have you heard of Polaris Global and what do you know about it? I have seen some material which links it to a scam and to scientology The organisation seems to have reinvented itself a few times

1996 polaris 500 4x4 [ 1 Answers ]

OK... so I have a 1996 Polaris 500 4x4. It was working fine it had a little bit of problems holding the battery though. So I would have to pull start it but one time when I pull started it the string wouldn't go back in but it started and it started to make a loud clanking/grinding noise from...

Polaris won't start [ 1 Answers ]

4 stroke 425 4x4 magnum. It began by not starting, but try again in 20 min. or so and would start fine. The 20 min. wait time kept getting longer until now it won't start even with a little shot of ether. This progressed over a period of 4 months.

Timer on my Polaris [ 1 Answers ]

How do I connect the wiring for the motor that runs my Polaris? There are 5 ports (2 are for "line" and 2 are for "load")? Thanks.


View more questions Search