Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to change out and install a push pull bathroom sink wate supply line
[ 3 Answers ]
How do you change a push pull shut off water supply line for under the bathroom sink?
I have a leaky water supply line to my toilet, the shut off valve is a pull and push
[ 3 Answers ]
The water shut off is a pull and push type, pull up to turn off and push in to turn on is this and all in one piece, I can't figure out how to disconnect the line from the shut off
Newly installed angle shutoff on cpvc leaking at cpvc
[ 7 Answers ]
I just installed a shutoff valve for a garage bath sink and I used primer and cpvc glue on the pipe (but not the inside of angle valve). Now after drying 3 hours, its leaking at the cpvc. Is there any way to fix/glue the leak without cutting off the shutoff and going back to store to get a new one...
Moen push/pull crystal faucets hard to push/pull
[ 1 Answers ]
Hi. I have Moen crystal looking single facuets (I don't like) that are about 7 years old, came with the new house. They started getting dirty and so I took the handles off and cleaned them with soap and a scum cleaner and used a screwdriver to get some of the "plaque" out. Now, even after... View more questions Search
|