Wiring 22a 277v power source

Patriciaclongmi Posts: 1, Reputation: 1

New Member

Nov 29, 2018, 08:35 PM

Wiring 22a 277v power source

Power source wiring 22a 277 v

tkrussell Posts: 9,659, Reputation: 725

Uber Member

Nov 30, 2018, 04:36 AM

Do you have a question?

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Nov 30, 2018, 11:09 AM

If you have to ask how to do it, you need a professional. 3 phase 277 Y is nothing to learn on.

Add your answer here.

Check out some similar questions!

Wiring two switches one power source [ 3 Answers ]

I have a single light that is controlled by a regular switch and a dimmer switch and I have another regular switch that gets it's power from the dimmer switch in the same box. Here is my dilemma the box where I'm installing the light has a red wire,a white wire and two black wires now the light...

Wiring Light with Power Source in Middle [ 1 Answers ]

I have a light box on a post that I have to feed power to but the electrical source is in the middle of the run and the switch is at other end going up steps. I was going to hook the white from light to white at power source, black from light to white from switch with a piece of black tape on it...

Wiring multiple switches and one recept to one power source [ 1 Answers ]

Need to wire two separate sp switches and one recept to a single hot?

Wiring switch and gfi with one power source in [ 1 Answers ]

I need to make one ground fault outlet and one switch to a vainity light using one powersource. The power source comes into the switch box as well as wiring from the gfi box and the wire from the vanity light. I created two pig tails off the power source hot (black wire), one is connnected to the...

Electrical power source in house wiring [ 1 Answers ]

How do you determine if the power source is coming to a ceiling fixture then to the wall switch or vise-a-versa.