Ask Experts Questions for FREE Help !
Ask
    Reighn9's Avatar
    Reighn9 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 6, 2018, 10:04 AM
    Why do I need 2 water heaters on 1 water supply line?
    I had 2 gas supply lines on 2 separate meters and 1 water supply line in my house. When I had a fire the plumber combined the gas lines onto 1 meter. There are 2 bathrooms in the house and instead of fixing a broken water pipe under the front bathroom that supplied the water to the back bathroom, the plumber ran new pipe through the ceiling to the back bathroom and sink. He installed an electric water heater in the back bathroom. I have a gas water heater in a hallway closet near the front bathroom. This is the original water heater in the house. The plumber told me each bathroom needed its own water heater. Recently it was determined the electric water heater has been using 4-6 times the energy it should and running all the time, never shutting off when not in use. I have had $500 plus electric bills for some time so I had the meter checked and the company determined the water heater to be the culprit. Can the water supply line be tied to 1 water heater? Can it be tied into my existing gas water heater? Can I change to a gas tankless water heater and tie it into the water line for both bathrooms, sinks,and washer? Yes I know I need a professional plumber to install a gas water heater or make some of these changes, but I would like a little foreknowledge, because the plumber that installed the electric water heater installed many things I had to have redone at extra expense,and items I'm still finding or haven't been able to afford to fix yet.
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
     
    #2

    Nov 6, 2018, 02:58 PM
    All the things you ask are possible, but without having an understanding of the layout of your house and your expected hot water usage it's impossible to make an informed recommendation. But a few things to consider:

    -You say you started with two gas supply lines and two gas meters. Perhaps the plumber eliminated one meter so as to consolidate your gas utilities onto one account, which could save $$ over having two separate accounts.


    -One gas meter can feed multiple appliances, so if you want two gas hot water heaters fed by the one meter that should be no problem as long as it's not too difficult to run a gas line from the meter to where the existing electric heater is located.


    -If you want to eliminate the electric heater and use the one gas heater for all hot water that's possible, but will require rerouting hot water lines that are currently supplied by the electric heater. How difficult or expensive that may be will have to be determined by a plumber who can see what the layout of your house is.


    -You can convert to tankless hot water heater(s) - either one or two. You will want to determine the appropriate capacity of the heater based on your expected demand for hot water in your household. For example do multiple people take showers simultaneously?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #3

    Nov 6, 2018, 07:42 PM
    How old is this house? Was this an apartment or duplex at one time? Never saw 2 meters in a single house. Anything can be done, depends on the money you wish to spend. Before you jump on tankless, pay close attention to the cost. You may need a new gas line or electrical service. Why does each bathroom need a hot water heater? I have a 3 BR house and 1 X 50 gallon gas heater. How many.people in the house?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #4

    Nov 7, 2018, 07:35 AM
    Recently it was determined the electric water heater has been using 4-6 times the energy it should and running all the time, never shutting off when not in use.
    That's a little difficult to imagine. If that is genuinely happening, then you would have a T&P valve popping off. Is this a conventional tank-type electric water heater?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drain hot water tank before doing work on cold water supply line? [ 15 Answers ]

I need to install a vacuum relief valve on the cold water supply line for my hot water tank. I know where to install it but I was just wondering what I need to do before doing the work (obviously turn off the water to the house), but do I need turn off the power (its electric) to the hot water...

Can shutting the main water supply off and draining the system drain water heaters [ 4 Answers ]

We have a 2 story building with multiple suites and some of the suites have water heaters. We need to shut the water down and drain the system to replace a backflow. Can this cause the water heaters to drain?? The shut off between the backflow and the building is old and we are afraid it may...

Where is a good location for a hot water tank on the main water supply line [ 3 Answers ]

I have moved my hot water tank to a new location in the basement. The new location is closer to the main water line. The best way for me to describe it is; from the street to my house to the water meter and from the water meter I have 7ft. Of 3/4" pipe. I want to run a 1/2" pipe to my hot water...

Supply line won't stop running. Main water supply off [ 3 Answers ]

I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...


View more questions Search