I set my thermostat and when programmed it keeps wanting to go to zone 1

Check out some similar questions!

How do I switch from a programmed setting on my thermostat to manual operation? [ 1 Answers ]

How do I switch from a programmed setting on my Dico model #1F80-273 to manual operation? I want to be able to up and down temp. On my own. No program.

I have a duel zone heating system zone one doesn't work but zone two does. [ 0 Answers ]

I already replaced the circulator and thermostats. This is oil fired furnace with baseboard heat. T he pressure on the furnace is running about 30 psi

2 zone thermostat [ 1 Answers ]

I am looking for a compatible digital thermostat for my system. It is a trol a temp system from 1989. One blue one white one red wire. It is a power on and power off system. I need power to open the damper using red and white while opening it kicks on the furnace. Power then goes from white to...

Zone is hot but thermostat is set to a low temperature [ 2 Answers ]

Greetings all, This seems like a great place to start! Here's my problem: Just bought a house, which is heated via an oil furnace and hot water baseboard heaters. There are 3 zones, whereby 2 are controlled via Noma thermostats. So far, so good (no problems with zones 2 and 3, which are the...

Programming 3 zone thermostat [ 3 Answers ]

I have a multi level home, and it's set up in 3 zones so I can set my thermostat for each zone, up to 4 periods per day, for the whole week(HVAC tech says they now claim this method really doesn't save $). We are comfy at 68 for heat, so if other zones aren't being used for a period, what is...

View more questions Search

Check out some similar questions!

Add your answer here.