Ask Experts Questions for FREE Help !
Ask
    Khâsha26's Avatar
    Khâsha26 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2017, 11:57 AM
    Pot lights
    3 pot lights stopped working after I cut the circuit breaker. They activate together. I replaced the "full slide dimmer" thinking I burnt the fuse out. Still nothing.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 28, 2017, 02:01 PM
    Are there only 3 lights on the breaker? If so, make sure you reset the breaker? If not, do the other outlets or lights work? Is there a tripped GFCI? Sometimes people put lights on the load side of a GFCI.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Oct 29, 2017, 08:05 AM
    Try bypassing the Dimmer.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #4

    Oct 29, 2017, 11:23 AM
    Let's start at the beginning, please. Exactly why did you "Cut" the breaker and exactly what do you mean by the term "cut?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a2002 honda accord tail lights dashboard lights not working but brake lights [ 1 Answers ]

2002 Honda Accord tail lights not working brake lights stuck on

Tail lights dash lights parking lights quit working [ 1 Answers ]

But turn signals work brake lights work radio works fuse and bulbs are good

1993 honda accord ex no tail lights, no cluster lights, no radio lights [ 1 Answers ]

Yet radio works. I have checked all the fuses with voltmeter all good. Is this a dimmer relay issue and if not what could it be. Need answer immediately please. I transport my small daughter and am unemplyed at this time. I appreciate all the help. Thank you.

No tail lights no brake lights or dash lights on a 1994 mazda b3000 [ 6 Answers ]

I own a 1994 mazda b3000 and was driving along when the dash lights went out then when I got pulled over come to find out the tail lights and brake lights don't work as well I noticed thogh the abs light flash's 12 times then pauses for a second then flash's again 12 times and so on all the fuses...

Tail lights and dashboard lights not workingbut brake lights work [ 4 Answers ]

I have a 95 ponitac bonneville, when I pull the switch to turn it on, the headlights only go on. My dash and tail lights will not go on. When I press the brake my dashboard lights go on. When I release the brake the ddash goes back off. Help anyone

View more questions Search