Ask Experts Questions for FREE Help !
Ask
    pina's Avatar
    pina Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2017, 08:38 AM
    Hi I have electric forced air Lennox furnace sentinel ec10 Blower runs but no heat co
    Hi I have electric forced air Lennox furnace sentinel ec10
    Blower runs but no heat coming from elements. What do I do to get heat?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 21, 2017, 01:49 PM
    Could be a bad thermostat, bad control board, bad sequencer. What happens when it calls for heat?
    pina's Avatar
    pina Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 21, 2017, 02:25 PM
    When it gets really cold outside (i.e. below -10) the heat does not seem to work as well. And the thermostat turns off the heat sometimes when it's that cold. Very inconsistent.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Jan 21, 2017, 05:50 PM
    Well, is it no heat or "no" heat when it is -10, big difference. You need more BTU in than what goes out. A lot can depend on insulation, air leaks, windows etc. I believe capacity is your problem. What is the BTU rating for your heater? How many square feet in your house? Where are you located? Please clarify to entire situation.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My nortron forced air electric furnace won't produce enough heat [ 1 Answers ]

I have a nortron electric furnace in my mobile home. It has always worked great, but lately when the temperature goes below -18C it won't heat up to room temperature and runs constantly.

Lennox Sentinel EC10Q4-25 Electric Furnace [ 1 Answers ]

I have a Lennox Sentinel EC10Q4-25 electric heat furnace. My home is a cottage (basement: 33' x 25', 1st floor 33' x 25', 2nd floor 33' x 25' I need to replace my 3 ton (I think) heat pump (Lennox HP-23-411-1P). I was told that the Lennox CVP10-46 (3.5 ton I think) coil inside the furnace...

Lennox Sentinel EC10Q4-25-1 Electric Furnace Blower Performance [ 1 Answers ]

Does anyone know how many CFM's of air the blower on this unit can push on low, medium and high speeds? Thank you.

Forced Air Furnace Blower Turns On and Off During Heat Cycle [ 0 Answers ]

Hello! I have a Lennox furnace that is approximately 10 years old. When the thermostat calls for heat, the ignitor lights and after a few seconds, a flame ignites across. After a few more seconds the blower comes on. However, after a few more seconds the blower turns off. The blower...

Lennox furnace sentinel ec10 no heat [ 2 Answers ]

Blower runs but no heat coming from elements

View more questions Search