Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Convert 220 VAC 1Phase to 2-110VAC circuits
[ 6 Answers ]
I have a 220VAC single phase 30 amp circuit that I would like to split into two 110VAC circuits. The 220VAC circuit has 3 wires and if I measure across the two main terminals I get the 220VAC and if I measure between a main terminal and what appears to be ground, I get the 110VAC. If I take one of...
Convert 220vac, 2-wire and ground, to 110vac
[ 6 Answers ]
Is it possible to convert a 220vac, 10AWG, line with only 2 black hot wires and a bare ground wire to a 110vac line? Can the source at the main junction box, which has a 2-pole CB, be rewired to replace the 2-pole breaker with a 1-pole breaker and grab the neutral at the main box by connecting...
LEVITRON PR180 Photo Electric switches in 2 wire 110VAC outlets?
[ 1 Answers ]
I have bought several Levitron PR180 Photo Electric switches and am overseas where 110VAC outlets only have 2 wires (one hot, one ground). Could anyone assist telling me if it will be possible (and how to do it) hooking up these switches to work in the Auto position? Thanks a lot. Clarindo
Can I convert my propane water heater to natural gas or electric?
[ 2 Answers ]
Can I convert my LP water heater to natural gas or electric?
By passing control board on electric water heater
[ 1 Answers ]
Can someone tell me if I can by pass the control board on my electric Whirpool hot water heater. I have a new C. B. coming Tuesday, but I would like a shower before then. I have the red,black and white wires coming in and there is a blue,orange and yellow going out of the control box to the... View more questions Search
|