Ask Experts Questions for FREE Help !
Ask
    Jenaepoodles's Avatar
    Jenaepoodles Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 6, 2016, 10:10 PM
    How to wire remote control fam to a 3 way pull chain switch
    I want to eliminate my remote controlled on ceiling fan in
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #2

    Mar 7, 2016, 05:52 AM
    Please try again to provide a more detailed question.
    Based on the short intro provided, I will vote "no" as the answer...
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Mar 7, 2016, 11:00 AM
    Unless you are experienced in tracing wire circuits and soldering or joining wires, you are better off to buy another fan.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Mar 7, 2016, 06:05 PM
    Is there also a wall switch and/or pull chains?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #5

    Mar 7, 2016, 07:05 PM
    If the fan has a built in remote system and no pull chain at all for the speeds it cannot be done.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #6

    Mar 7, 2016, 07:07 PM
    Stan, I am wondering if there is a three speed wall switch, that would work. I never install a fan with a remote without some other switch somewhere
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire a pull chain switch to ceiling fixture [ 2 Answers ]

Hello, I have a pool table light that I need to install. The existing wires in the ceiling are as follows. There are 3 black wires. 3 white wires and a cooper wire. Only 1 white wire has power and only 1 black. My question is what wires do I use to make this thing work and what to do with the...

Fan stopped working with remote/pull chain; light still works with pull chain. [ 1 Answers ]

Hampton Bay Tahiti Breeze with light kit, Model 344 476; remote control, model UC7083T; & pull chains. Fan/light worked till last night; now fan does not work either way. Light works with chain. Checked electrical switches; okay. Tried replacing battery in remote, but no difference. Try to...

I have a single wire pull chain switch that needs to be replaced [ 0 Answers ]

My current ceiling fan pull chain is a single wire. The only replacement I can find is a 2 wire pull chain switch. Where do I get a single wire switch or how do I wire the 2 wire switch.

How to convert remote control ceiling fan to three-way pull chain [ 4 Answers ]

I am wanting to change over from a remote control to a manual pull chain for my Hampton Bay ceiling fan with light. I have a off/on light pull switch which will not be a problem. I also have a 3-way switch that I want to wire into the fan. Existing wiring: black and white power; small yellow,...

View more questions Search