Ask Experts Questions for FREE Help !
Ask
    antiqueauction's Avatar
    antiqueauction Posts: 7, Reputation: 1
    New Member
     
    #1

    Jan 27, 2016, 01:34 PM
    Blinking 2 times
    INSIDE MY TRANE XL13C Is a blinker light that blinks twice ( 2 ) times
    What does it mean
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jan 27, 2016, 02:44 PM
    The flash code should be on the control panel or on a chart on the inside of the air handler door.
    Here is what I found. These are Trane codes but not necessarily for your model which I believe may be a heat pump or dual fuel model.


    LED Flash Error
    Flashing Slow Normal No Call for Heat
    Flashing Fast Normal Call for Heat
    Continuous On Replace Control
    Continuous Off Check Power
    2 Flashes External Lockout (Retries or Recycles Exceeded)
    3 Flashes Pressure Switch Error
    4 Flashes Open High Limit Device
    5 Flashes Flame Sensed when NO flame should be present
    6 Flashes 115 VAC power reversed polarity or poor grounding
    7 Flashes Gas Valve circuit Error
    8 Flashes Low Frame sense Signal
    9 Flashes Check Ignitor

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Red light blinking 3 times.. [ 2 Answers ]

Red light blinking 3 times.. Fan comes on then goes off and repeats the same problem.. Tank will not fire up

Trane xl80 led light blinking 4 times [ 1 Answers ]

I try to set up my heater and I have a 4 blink led light in the unit trane XL80. What does that mean?

York furnace 90 plus blinking light 3 times [ 3 Answers ]

I have a York 90 plus furnace, the red light was blinking 3 times, I pulled the wires off the condesation pressure swithch and placed a jumper in the wires the blinking lights stopped and the furance kicked on, can I leave the jumper in till it get the part?? Is it safe to do leave the jumper in??

Nordyne furnace red light blinking three times [ 0 Answers ]

I have a nordyne furnace and its not working a red light is blinking three times and I need to know what is wrong soon have a two month old

Concord 95% light blinking 3 times what are the possible causes to create the problem [ 1 Answers ]

I just installed a concord 80,000 95% furnace, now I am getting a blinking light 3 times, if I jump the pressure sensor wires it works fine what are my possible problems


View more questions Search