Ask Experts Questions for FREE Help !
Ask
    gmabaldi's Avatar
    gmabaldi Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 18, 2016, 11:49 AM
    Kenmore refrigerator icemaker
    When the water runs into my ice maker it overflows. What could be the cause?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jan 18, 2016, 12:45 PM
    Probably a defective fill valve.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore refrigerator ice makerwhy does my kenmore icemaker won't get any water? [ 0 Answers ]

The water line got connected, and I made sure that it works, but it will not go pass the water line, is there a special wireing I need to know,, there are three little motors, but only two of them have a connection, (power supply),

Kenmore Coldspot Refrigerator Icemaker [ 0 Answers ]

Kenmore elite coldspot 106.57712700 makes ice but doess not dispense. Chute door opens but no motor sound. Water dispenses just fine.

Refrigerator not cold enough and trouble with icemaker [ 1 Answers ]

I have a 2006 Kenmore Coldspot side-by-side refrigerator. I have had a problem with the icemaker for about a month in that the icemaker is producing very little ice, about 16 per day, and the ice is about 1/4 smaller than it should be. The Freezer temperature feels fine. Now I am noticing...

Icemaker line for refrigerator [ 3 Answers ]

Hi, I want to install an icemaker line for my new refrigerator, I would like to use flexible copper. Here is my problem, my kitchen is on a slab, and I have to run the line up into my crawl space, which gets below 32 degrees in the winter. Would I be able to insulate this line or possibly run it...


View more questions Search