Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My intertherm (70s model) fuel oil furnace in a mobile home won't fire up,won't reset
[ 8 Answers ]
My 70s model intertherm fuel oil furnace won't fire up, I have reset it several times, it was firing but only for a short while but nothing now. I cleaned off the cad cell eye... any ideas why?
Old furnace won't fire.
[ 5 Answers ]
My Trane XL 600 (American Standard) furnace is on the fritz. The blower will operate from the thermostat. Jumped R&W @ t-stat and got nothing Jumped @ furnace & got nothing. Fuse is brand new, gas valve is brand new (oof). Standing pilot is lit so thermocouple is good (yes?). I get nothing when...
Furnace won't fire up
[ 1 Answers ]
Electric pilot ignitor is sparking fine - Gas is flowing fine but pilot won't light with out using a match Brand new ignitor & gas valve Any ideas?
My furnace won't fire up
[ 3 Answers ]
I have a Keeprite SP 80 High Efficiency model # NUG5075BFB2 the pilot is lit but the furnace won't fire the thermostat( new batteries) is set for 70. The filter is clean, I tried turning everything off including the gas and the thermostat then turned everything back on the pilot is on but the...
Furnace sometimes won't fire, blower fan sometimes won't turn off
[ 3 Answers ]
Hi, I have a natural gas furnace that is starting to give me grief. Often when I call for heat the motor and blower fan turn on and I get a blue induction flame, but the tubes won't ignite. At first I would turn off the furnace at the thermostat, wait for the fan to stop (which would sometimes... View more questions Search
|