 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
It sounds like a bad timer, but you need to check it out with a meter. Here are some manuals: https://dl.dropboxusercontent.com/u/...c%20washer.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf https://dl.dropboxusercontent.com/u/...20Handbook.pdf https://dl.dropboxusercontent.com/u/...ng_Machine.pdf https://dl.dropboxusercontent.com/u/...sher_Elite.pdf Here are some links:https://www.youtube.com/watch?v=fVE9dZODNjk https://www.youtube.com/watch?v=oBihToN6dxs You may also want to test the water level switch. |
||||
|
||||
|
Upon further observation, Agitator goes in one direction only on Heavy Duty setting, back & forth on normal and delicate settings with clicking sound with each change of direction back & forth on hand wash without clicking sound (appears to operate normally) Clicking sound sounds like perhaps a solenoid making and breaking, or two different solenoids, one for each direction.Florescent over head light on same plug as washer, flickers with each click.
|
||||
|
||||
|
With those manuals and a good meter you can find out if you have bad solenoids or, as I suspect, a grounded wire or device. That's easy to find; just unplug it and with one meter lead on ground search around with the other lead until you find the point it reads closest to zero.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Six month old dishwasher. Worked fine until today - won't start. LIghts are on and control panel seems to be working OK. The "Clean" indicator is flashing in intervals of 7 flashes and then pauses. When I select the "Start" button it flashes red 3 times and then nothing. The "Drain/Cancel"...
Error code F2E2. Machine taking no water.
The lock on button won't shut off so dishwasher won't run. I've pushed the heat off button as suggested and cancel and tried shuting off power at breaker. Any ideas? This is on the Kenmore Elite 665 dishwasher.
I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...
The washing machine is not spinning, so I am attempting to replace the coupler. I am able to partially remove the front console, but I can not remove the main knob. I found instructions that say to hold the dial and turn timer knob counter clockwise, but this is not working. This should be...
View more questions Search
|
