Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs & stratton 12.5
[ 8 Answers ]
My husband has an MTD with a b and s 12.5. It has run weill with some babying for a while, now. One day he was running ti and he heard a loud POP , and that was the end. It has new solenoid, starter, bettery and a few other things . The key is it is GETTING gas into the bowl, but not going ...
Briggs&Stratten 16.5 hp
[ 2 Answers ]
My MTD yard machine lawn tractor has a has a 16.5 hp Briggs and Stratton motor. Starts easily but will only run in the choke (start) position. Something simple to adjust?
Replacing b&s Magneto
[ 5 Answers ]
I have a 5 hp Briggs and stratton with a broken wire on the Magneto close to the winding, the wire that goes to the block ( I assume the Condenser/Points) is also in poor shape. I am looking at changing the magneto, DO I need to remov the flywheel to get at the wire to the condenser or is there a...
Briggs &stratton 15 hp.
[ 1 Answers ]
The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two... View more questions Search
|