[DIY7243]

Hi I'm replacing my Braeburn thermostat with a programmable Hunter thermostat and need to know which wire goes where.
Braeburn Model 3100
R – Red wire
Y1 – Blue wire
Y2 – Open
W2 – Yellow wire
W1 – White wire
G – Green Wire
O – Open
B – Open
C – Black Wire
Hunter 44260
G –
Rc –
Rh –
Y/O –
W/B –
Y1 –

[ballengerb1]

Here is the manual for the Braeburn http://www.braeburnonline.com/sites/...manual_rec.pdf Here is the Hunter Hunter 44260 Programmable Thermostat Owners Manual | ManualsOnline.com
Do you have a heat pump?

This may also help
Replacing Existing Thermostat
1. Always turn off power to the air conditioning or heating system prior to removing
existing thermostat.
2. Remove the cover of your old thermostat and locate the wire terminals. Do not
remove wires from terminals yet.
3. Using small pieces of masking tape label wires prior to removal from terminals. Use
the chart below to determine the new terminal designations for your new thermostat.
4. After labeling and removing all wires from terminals, unscrew the existing thermostat
sub-base from wall. Make sure to secure wires to prevent them from slipping back
into the hole in the wall.
Old Terminal from New Terminal for
Existing Thermostat New Thermostat Terminal Description
R, V-VR or VR-R R 24 VAC
Y, Y1 or M Y1 1st Stage Cooling
Y2 Y2 2nd Stage Cooling
W1 W1 1st Stage Heating
W2 or W-U W2 2nd Stage Heating
G or F G Fan Control
O or R O Reversing Valve (Cooling)
B B Reversing Valve (Heating)
C, X or B C Transformer Common
Premier Series
Non-Programmable
2 Heat / 2 Cool & Heat / Cool
Digital Thermostat
CONTENTS
SPECIFICATIONS
INSTALLATION
TESTING YOUR NEW THERMOSTAT
PROGRAMMING USER SETTINGS
ADDITIONAL OPERATION FEATURES
TROUBLESHOOTING
WIRING DIAGRAM
1
2
3
4
5
6
7
1
2 3
2 INSTALLATION
2.1 Replacing Existing Thermostat cont.
Installing Your New Thermostat
NOTE: If

[DIY7243]

Thanks for the answer. I do not have a heat pump. Also, the yellow wire is actually orange according to my wife. I already have both manuals, the heat seems to work correctly with the R on RH, W1 wire on W/B, G on G, not sure what wires connect to the RC, Y/O, or Y1. I still have the Blue Y1 wire (1st stage cooling according to the manual, Orange W2 wire (2nd stage heating), and Black C (Common).

Here is the manual for the Braeburn http://www.braeburnonline.com/sites/...manual_rec.pdf Here is the Hunter Hunter 44260 Programmable Thermostat Owners Manual | ManualsOnline.com
Do you have a heat pump?

This may also help
Replacing Existing Thermostat
1. Always turn off power to the air conditioning or heating system prior to removing
existing thermostat.
2. Remove the cover of your old thermostat and locate the wire terminals. Do not
remove wires from terminals yet.
3. Using small pieces of masking tape label wires prior to removal from terminals. Use
the chart below to determine the new terminal designations for your new thermostat.
4. After labeling and removing all wires from terminals, unscrew the existing thermostat
sub-base from wall. Make sure to secure wires to prevent them from slipping back
into the hole in the wall.
Old Terminal from New Terminal for
Existing Thermostat New Thermostat Terminal Description
R, V-VR or VR-R R 24 VAC
Y, Y1 or M Y1 1st Stage Cooling
Y2 Y2 2nd Stage Cooling
W1 W1 1st Stage Heating
W2 or W-U W2 2nd Stage Heating
G or F G Fan Control
O or R O Reversing Valve (Cooling)
B B Reversing Valve (Heating)
C, X or B C Transformer Common
Premier Series
Non-Programmable
2 Heat / 2 Cool & Heat / Cool
Digital Thermostat
CONTENTS
SPECIFICATIONS
INSTALLATION
TESTING YOUR NEW THERMOSTAT
PROGRAMMING USER SETTINGS
ADDITIONAL OPERATION FEATURES
TROUBLESHOOTING
WIRING DIAGRAM
1
2
3
4
5
6
7
1
2 3
2 INSTALLATION
2.1 Replacing Existing Thermostat cont.
Installing Your New Thermostat
NOTE: If

[ballengerb1]

Working from an iPhone it's hard for me to see everything but I thought one of those stats was for a heat pump.

[DIY7243]

After a long afternoon and a lot of research the reason that this thermostat wouldn't work right was do to the fact that it is a 2 stage furnace. I finally found that out from looking up the manual for the furnace online.