Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My gas furnace is occasionally short cycles, leading to system lockout.
[ 1 Answers ]
Occasionlly (once or twice per week), when gas is called for, 5 of the 6 inshot burners ignite, but the 6th, containing the flame sensor will not ignite. This causes the gas to shut off and then the unit recycles sometimes igniting properly and sometime going into system lockout after 3 tries
Heater cycles too short and cycles many times before heat actually goes on...
[ 0 Answers ]
I have a 4 year old Goodman heater model GMS81155CNA that we just replaced the blower motor on, fortunately it was under warranty until April. Now it keeps trying to cycle 2 or 3 times before the burners actually go on, sometimes it will ignite on the first attempt other times it won't. Often we...
My blower fan/furnace motor on my natural gas/air conditioning system short cycles?
[ 1 Answers ]
This summer I had my air conditioning unit replaced after the previous one unknowingly froze up and as a result blew up. The new unit was working well after it was installed in conjunction with the natural gas furnace without issue - albeit the blower on the furnace unit distributes the cold air...
Bryant heating system cycles through for about 4 minutes and then shuts down.
[ 1 Answers ]
Model 340AAV condensing gas furnace was installed in 2008. Tested the unit by turning off the unit and gas. Next I set the thermostat just a few degrees above the house temperature, turned the gas valve to the on position and then turned on the heater unit. The burners started immediately and began...
My home heating system cycles even at 65 degrees is this normal
[ 1 Answers ]
I am new to this. 1) I hear the system come on, then I hear the furnace fire up then the fan comes on after running for a few minutesit will all shut down, then repeat after about 5-6 minutes. The thermostat is set at 68 degrees is this normal? View more questions Search
|