Ask Experts Questions for FREE Help !
Ask
    MWRyland's Avatar
    MWRyland Posts: 24, Reputation: 2
    New Member
    		  
    #1

    Dec 7, 2014, 09:10 AM
    I have a rheem heat pump with led 1 on and led 2 off. The code list says press set.
    In the heat pump unit there are 2 leds. Led 1 is on and led 2 is off. The diagnostic chart says press set. What does that mean. There is no reset button.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Dec 7, 2014, 11:45 AM
    Some Rheem's have a reset button on the outside of the unit down low. What's the model number?
    MWRyland's Avatar
    MWRyland Posts: 24, Reputation: 2
    New Member
    		  
    #3

    Dec 7, 2014, 01:04 PM
    Quote Originally Posted by bitters View Post
    Some Rheem's have a reset button on the outside of the unit down low. What's the model number?
    Found out how to reset the panel. There are 2 test poles which you need to short out. After I did that the unit reset and seems to be working fine.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White rodgers 50a50-241 led dead... no light on led, nothing works [ 0 Answers ]

Is led light supposed to stay on all the time? Mine comes on for 1 second and then goes off (blank) the transformer is powered up (27vac) but control panel and thermostat are dead. Led on controller is out, and thermostat display is blank. Do I have a bad controller? Is there any LED blink for...

Criterion II Rheem LED signal [ 3 Answers ]

I do not have an operations manual nor can I find one online that will tell me what it means when my Criterion II heater has a LED light that flashes 4 times and will not kick on. I can get the heater to come on by jiggling wires, but once it goes off again, it will not come back on. The heater is...

My Lennox G40UH (X) Does Not Have Hot Air => 1st LED Flashes, 2nd LED Is On [ 3 Answers ]

Hello All Brothers, we really, really need your help. Our family live without heater almost a week. We both lost our jobs that is why we must wait until today. Here is the problem: Based on the diagnostic codes, 1st LED flashes, 2nd LED is On => Primary or secondary limit switches open. Here...

Rheem led codes? [ 2 Answers ]

What does code 9 mean on a rheem prestige ac unit

Goodman GMH8 heating unit - LED Led flash 4 times [ 4 Answers ]

Hi, I have just recently bought a Goodman GMH81155CNAG gas heating furnace. I find the manual is very unhelpful as far as diagrams and explanatory. The problem that I am having is when I closed the doors for the furnace, the heat would stop and only the blower running. The LED would flash...

View more questions Search