Ask Experts Questions for FREE Help !
Ask
    zaftig314's Avatar
    zaftig314 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2014, 06:01 AM
    Clean the flame sensor on Carrier WeatherMaker 8000ts
    How do I remove the flame sensor on my Carrier Weather Maker 8000ts for cleaning?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 19, 2014, 04:03 PM
    We need an actual model number to look up a parts diagram. The 8000 is just a series.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier weathermaker 8000ts manual [ 1 Answers ]

Yellow light

Carrier weathermaker 8000ts manual [ 1 Answers ]

What is the Wattage requirement for this system?

Carrier Weathermaker 8000TS - Blower Won't Run In Heat Mode [ 0 Answers ]

I have a carrier 8000ts. When I turn the thermostat to off and have the fan in the on position I can get the blower to work, but only if I hold down the door switch and push the blower blades. Once the heat is turned to ON on the thermostat and the furnace ignites, the blower turns off. Any...

Carrier WeatherMaker 9200 flame sensor [ 0 Answers ]

I need to clean the flame sensor on my Carrier WeatherMaker 9200 but it seems pretty tough to get to. Is there a semi-easy way to get to it without taking the whole thing apart?

Fan on Carrier Weathermaker 8000TS won't turn off [ 3 Answers ]

Hello. I have a Carrier Weathermaker 8000 TS (gas) that is about 7 years old. I was running the furnace fan (not the AC or heat) one day last week (to circulate the cool air in our basement) and it wouldn't shut off until I killed power to the unit. I have tested the furnace fan a few times...

View more questions Search