Check out some similar questions!
Neutral And Ground Bonding
[ 7 Answers ]
I am replacing my oven. Service at the main breaker's bus bar has neutral and ground in the same bus bar. Since the wire to the old oven is Aluminum, I will run Aluminum wire to a sub panel and use copper wire from the breaker to the oven. Do I bond the neutral bar to the sub box? I don't...
Bonding the neutral bar
[ 9 Answers ]
I have a 200amp main panel in my basement. I want to put a 100amp subpanel in my garage to service 2- 2pole 20amp circuits for 2 a/c condensers and 2- single pole 20a convenience circuits for the garage. My questions are 1 what size feeder wire would I need for the subpanel. (THHN in conduit) and...
Bonding neutral in a transformer
[ 1 Answers ]
If you bond your neutral in a transformerdo have to bond your neutral in a panel.
Where is the neutral bonding on my generator
[ 5 Answers ]
I purchased a milwaukee 4960-24 generator and need to remove the neutral bonding wire,any suggestions
Bonding of the neutral and ground
[ 2 Answers ]
I currently have a subpanel coming from a main distro panel with my local power source being a Y connected generator. How many places/panels should the grounded and grounding conductors be bonded? I believe it is the first means of disconnect which is my MDP. All subpanels from that point on... View more questions Search
Add your answer here.
|