[kyfixit]

My dishwasher lights work, but when I push start it will just beep at me about 10 times and then nothing!
In other posts I saw others able to run a reset by pushing the "normal wash" button and "heated dry" button alternating this quickly 5-10x, but this did nothing for my model 665.1304 dishwasher. So, under the bottom panel I found a "technicians" guide. It mentions a diagnostics cycle. It says to "push any 3 keys in the sequence 1-2-3-1-2-3-1-2-3with no more than 1 second between keys.
so I pushed the keys on the right did this (turbozone,hightemp,sanirinse and did this quickly 3 times) ALL lights came on and started running checks and to fast forward it says to push start. After all I canceled and now seems to be OK. Lights are on to normal and I'm running a wash. Anxious to see if this did the trick! Anyone else know if I did this right?

[drtom4444]

You must have done it right.