Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Add a illuminated on/off switch to my power supply
[ 0 Answers ]
I have a Inteli power 9100 that I use as a 12vdc power supply. I want to add a lighted on/off switch. The switch is a Eaton lighted rocker with 3 lugs (15 A 125vac / 10A 250vac ) the lugs are marked 1,2 & 3, The power coming into the case has a black, white & green. Can you tell me how to wire...
Wiring illuminated DPST rocker switch to Power Supply
[ 5 Answers ]
Hi! First time "asker"! I have recently built a device for medical use, so electrical safety for the patient is of upmost importance. I currently use a medical grade switching Power Supply +/- 15VDC (IPD, model SRP-25-2005). An AC inlet, IEC 320, brings Line and Neutral power to a medical...
Illuminated ight switches
[ 1 Answers ]
I have been trying to figure out how much electricity is used by the rocker illuminted light switch? We have around 20 of them in our home and I just can't believe they are real efficient. Thanks
Wiring an illuminated rocker switch
[ 6 Answers ]
Hi, I'd like to wire an illuminated rocker switch as an "on-off" switch for my AT power supply. The original switch had 4 wires to it, white, blue, brown, black. I had to bypass the old switch by looping the 4 wires in pairs, ergo,. hooked white to blue, then brown to black in order for the...
3-Way Light Switch Illuminated Toggle Question
[ 1 Answers ]
Hi: Here's my dilemma. I have an outdoor flood light that is outside of the garage and has both a 3-way switch in the garage and in the house. Since I put in those windowless garage doors, I can't see whether the flood light is on or off, and many a night someone leaves the light on all night.... View more questions Search
|