Ask Experts Questions for FREE Help !
Ask
    muhammadsuleman's Avatar
    muhammadsuleman Posts: 2, Reputation: 1
    New Member
     
    #1

    May 23, 2014, 02:33 AM
    What should the appropriate hight of cooling tower sump for absorption chiller
    What should be the height of cooling tower sump for absorption chiller. Should it be higher than the condenser connections to avoid overflow, if yes than how much height should be maintained?
    smoothy's Avatar
    smoothy Posts: 25,492, Reputation: 2853
    Uber Member
     
    #2

    May 23, 2014, 05:30 AM
    Lower... if you have overflow issues... you have a different problem that needs addressed with the make-up.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rust attached to the interior surface of an absorption chiller vessel is it normal ? [ 0 Answers ]

Rust attached to the interior surface of an absorption chiller's vessel is it normal or abnormal ?

Cooling tower foaming [ 0 Answers ]

What causes cooling tower foaming?

How the cooling tower tonnage is related to chiller tonnage [ 1 Answers ]

How is cooling tower tonnage is related to chiller tonnage ?

Cooling tower evaporation, blowdown, makeup and cycles [ 0 Answers ]

Here are the governing relationships for the makeup flow rate, the evaporation and windage losses, the draw-off rate, and the concentration cycles in an evaporative cooling tower system: http://www.air-dispersion.com/CoolingTower.gif M = Make-up water in gal/min C = Circulating water in...


View more questions Search