Check out some similar questions!
Beacon morris garage heater?
[ 1 Answers ]
I hooked up a 75,000 BTU heater in my garage last weekend and at first everything worked fine. Later, I heard the heater running, even though the thermostat was in the off position. I called Honeywell and we concluded the thermostat was bad. Got a new one, installed it, and everything was fine...
Beacon morris bru-45 ignites then goes out
[ 2 Answers ]
Beacon morris bru-45 furnace will ignite, run for a short time, go out. The light will flash 2 time then pause,then repeat. Does anyone know what the error code is?
I have a beacon/morris bmf-125.
[ 0 Answers ]
The unit makes a loud electrical type humming when power is applied. Also the pilot will not stay lit. the thermocouple has been changed twice just in case. I have swapped the transformer from another unit of same. The fan will also start up even with no heat. HELP ?
Beacon morris garage heater?
[ 5 Answers ]
After just one winter of use my heater quit working when it calls for gas, gas came on but it would not ignite so I replaced the igniter, still did not work so I called a repair man he told me that the control board was bad so now I have a heater that is two years old that I paid approx 650 dollars...
Beacon Morris Tubular Heater
[ 2 Answers ]
45K BTU garage/shop heater. POS from day 1. I have replaced the ignitor, now after reading the book(AGAIN) the 4 flashes indicates that either my Roll Out Switch or Hi Limit Switch need to be reset - my question is this. What type/amount of resistance should I measure on these two switches to... View more questions Search
Add your answer here.
|