Ask Experts Questions for FREE Help !
Ask
    mrfixit784's Avatar
    mrfixit784 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 22, 2013, 07:22 AM
    White knight cl847 heater terminal block diagram
    I need a diagram for the heater terminal block (8 pins) I lost mine while waiting for elemant.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Dec 27, 2013, 07:32 AM
    Your dryer is made by Whirlpool and you can find a manual among this group of them here: https://dl.dropboxusercontent.com/u/...l%20Dryers.zip
    It is super easy to wire the elements. If you have two or more they are usually wired in parallel so that each one gets 240 volts. Use a meter to check your safeties in the dryer so that you do not have to do it twice, and make sure to change the belt and lubricate all bearings with white lithium grease (hi-temp grease). Good luck.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring diagram for White knight tumble dryer [ 0 Answers ]

Need to replace element removed old one and can't remember the wiring up in it.

White knight tumble dryer,rear wiring diagram/heater. [ 4 Answers ]

Please can you help, looking from the front of the tumble dryer to wards the back with the top off, would like the wiring digram for the heater and plastic block above, say from left to right, thank you.

I need a wiring diagram for white knight dryer wk427 [ 1 Answers ]

I have fitted a new driver belt and pulled a wire while doing it and don't know where it goes please help me its raining... white knight week 427,

View more questions Search