Ask Experts Questions for FREE Help !
Ask
    probs's Avatar
    probs Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 18, 2013, 06:29 AM
    Snow Blower
    My YTD snow blower has a Briggs and Straten engine. When I start the engine it will not run continuously. But if I pump the fuel injector buttom it will run. Could this be caused from fuel starvation? And if so how do I fix it without having to call or take it to a service center?
    Morrowrj's Avatar
    Morrowrj Posts: 345, Reputation: 22
    Full Member
     
    #2

    Dec 21, 2013, 07:50 AM
    Yes, I would say you are correct and have a fuel delivery problem. How old is the fuel in the tank ? If you can empty it and replace with fresh that would be a good start. It is possible there is a blockage either in the fuel line or filter or with the carberetor itself. Some fuel cleaner additive such as Seafoam may also help.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How far should a craftsman 5.5 hp snow blower model no. 536.886150 be throwing snow? [ 1 Answers ]

Has a new auger belt. Only throws it about 5 feet. Constantly gets clogged.

My signature brand snow blower clogges and won't throw snow why [ 2 Answers ]

It starts up first pull sounds great one push in the snow cutes clogged and it don't throw snow

Snow blower [ 0 Answers ]

Chain falls off sprocket on 47" jd snow blower after I replaced the set screws on the sprocket. The sprocket seems to be not aligned with the drive sprocket. Could this be the problem?

Snow blower won't throw snow impeller works auger works new belt pushes up the chute [ 11 Answers ]

The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could

Snow blower not picking up snow [ 2 Answers ]

I have a Noma 5.0 HP snow blower that is not working correctly. The shears are not turning and picking up the snow. I've checked the shear pins, but they seem to be in good condition. What else should I check? Thanks


View more questions Search