Ask Experts Questions for FREE Help !
Ask
    Goose14's Avatar
    Goose14 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2013, 07:36 PM
    Clean light flashing on Kenmore Ultra Wash Dishwasher
    I've reset as instructed and was able to start wash cycle, however, before making it through entire cycle the flashing light appeared again. Is it possible that I need to clean the lower assembly from any glass and / or debris? If so, what are the step by step instructions to remove the lower assembly?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Dec 4, 2013, 06:29 AM
    Look at these: https://dl.dropboxusercontent.com/u/...t%20Codes.docx
    https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
    Step one: Hold "Normal Wash" and "Start" together for 10 sec.
    Step two: Press "Air Dry" and "High Temp Scrub" back and forth until "Quick Rinse" button turns on solid.
    Step three: Press "Normal Wash" again followed by "Start."
    Step four: Let machine run until you see green "Clean" light come on.
    Step five: Press "Normal Wash" again and "Start" again.
    That's it. (From another post)
    https://dl.dropboxusercontent.com/u/...t%20codes.docx (Download link)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash Dishwasher flashing "clean" light needs to be reset [ 110 Answers ]

We paid a Sears repairman to come out when we had a flashing "Clean" light on our dishwasher, A Kenmore Ultra Wash 665.1603 or 1703, and he gave us the diagnostic code (buttons to push on the operating panel) and we have used it again after that, but I cannot find the order of the buttons to push...

Kenmore dishwasher ultra wash 665.1627 flashing start light? [ 0 Answers ]

I have read (and re-read) all of the questions and answers in this blog and have tried all of the solutions that sound even remotely useful. Sadly, our dishwasher continues to have the same problem. We can press our "normal wash" and "heated dry" buttons and they light up (as they should). Then...

Kenmore ultra wash 665 1315 dishwasher flashing green light troubleshooting [ 1 Answers ]

Hi I have a two year old Kenmore ultra wash 665 1315 and it doesn't start. The green clean light on the front is flashing 6 times, then once. I have tried the reset 1hr wash, heated dry and it doesn't seem to reset. Any help would be appreciated!

Kenmore ultra wash dishwasher lock light flashing [ 0 Answers ]

I have a kenmore ultra wash dishwasher model 16a69990/665 that won't run. The Lock On light is flashing. Tried turning off at power source, unplugging and resetting with random button pressing but no luck. Any ideas?

View more questions Search