Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honywell 2300/rth221
[ 0 Answers ]
Why every time I set the heat to 69 thr room gets to 83?
Hot an cold reversed with my Honeywell RTH 2300
[ 0 Answers ]
I have installed a Honewwell RTH 2300 to my home system and after hooking up my wires as follows: B = blue wire W = white wire Y = yellow wire G = Green wire R/Rc = Red wire to R terminal with jumper intact My sys. Is a heat pump (electric) with a trane unit outside and an air...
Honeywell thermostat rth 2300?
[ 4 Answers ]
I have an old airco gas furnace, I want to change the thermostat to a RTH 2300, problem is I only have two wires to connect to the thermostat a white and a black and am not sure where to put them? Help
Honeywell RTH 2300 Thermostat
[ 20 Answers ]
Hi, I bought a Honeywell RTH 2300 thermostat and I'm trying to hook it up, the wires I have coming out of the wall are white, green, red, yellow and blue. I hooked up the matching colors to the W, G, R, Y and the blue wire I attached to the O/B. I have the jumpers set as follows: jumper 1 HG and...
RTH221 Programmable Thermostat
[ 3 Answers ]
We installed the RTH221 one today and the only way I can get my gas furnace to shut off is to remove the top plate. There is 2 wires, the white went into the Y and the red went into the G--the factor jumper is still on. It's hot in here.. lol Can you please tell us what we need to do with this... View more questions Search
|