Ask Experts Questions for FREE Help !
Ask
    Valyn's Avatar
    Valyn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2013, 07:31 AM
    Craftsman YTS4500 mower deck belt slipped off
    The mower deck belt to my Craftsman YTS4500 Lawn tractor slipped off the front spindle. The manual calls it the "M" spindle. It's not broken, and still correctly routed through the other spindles/pulleys. Is there an easy way to slip it back on? The manual says to release the tensioner rod, but it doesn't tell you how to do that.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Oct 26, 2013, 08:39 AM
    Rod should be on left side of deck.
    When released should be loose enough to put belt on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 46 mower deck belt diagram [ 1 Answers ]

The V-belt is turning over in the motor pulley. The Primary Mower V-belt is not sitting the right way in the V on the motor pulley which is chewing the belt up.The belt is OK in the other pulleys. If I have the tension to tight the motor will not start because it turns the blades on the mower when...

Craftsman 48" mower deck belt [ 2 Answers ]

I purchased a Craftsman 48" 24 hp mower from a scratch and dent store. There are no model #s and I did not receive a manuel. I need a diagram to replace the deck belt that drives the blades.

Putting lower belt back on mower deck, Craftsman riding mower [ 1 Answers ]

What is the tension pulley? Gram, 67, wants to know? Replacing belt myself hopefully. Craftsman riding mower, lower belt came off. Have lowered deck, belt is loose, not sure where it goes, studying manual but how engage, disengage tension pulley?

I need a mower deck belt for a Craftsman xls 1000 riding lawn mower. [ 2 Answers ]

I can't find a belt for my Craftsman xls 1000 riding lawnmower deck.

View more questions Search