Ask Experts Questions for FREE Help !
Ask
    glassman1000's Avatar
    glassman1000 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 26, 2013, 06:34 PM
    John Deere D130 won't move after starting
    John Deere D130 won't move after starting. I press the petal and nothing happens.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Sep 27, 2013, 08:13 AM
    Hi,
    Diengagement lever in Run position? Had a flat tire and lost the key locking the axle to the wheel?
    Peace,
    Clarke
    glassman1000's Avatar
    glassman1000 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Sep 27, 2013, 08:23 AM
    Clarke,

    Thank you for responding. I'm not sure what the disengagement lever is. If that is the lever that engages the blades, it is not engaged.

    I haven't removed any of the tires.

    Thanks!
    John
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Sep 27, 2013, 08:25 AM
    Hi,
    Then it is the drive belt that is suspect, or the idlers.
    Peace,
    Clarke
    glassman1000's Avatar
    glassman1000 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Sep 27, 2013, 08:38 AM
    It gives me somewhere to start. Thanks again.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L110 won't move after starting [ 11 Answers ]

I too have a John Deere Lawnmower L110 that will start but will not move. I read another that had the same problem but the answer was an obvious one and one that we have tried, pushing the rod in. I have looked at all the belts and they are in tact. I have no idea what is wrong. I hestiate to...

4010 john deere tractor won't move [ 0 Answers ]

My 4010 John Deer tractor won't move, when it is in gear. It has a eight gear transmission, and is fueled with proane. I believe it is a 1963 model. The bucket moves up and down good, and PTO is working. Checked transmission fluid and it is good. Starts good, and sounds great, just won't go. Any...

John Deere LA145 Starts but won't move [ 1 Answers ]

I've been reading for a bit now, here is where I am! Piece of a gourd caused the belt to slip off at the transaxle (lodged it between the pulley and the fan), chewed up the belt a little. I got the belt back on the pulley, but the mower had greatly reduced power. Parked it. Replaced it with...

John Deere L100 won't move after starting [ 1 Answers ]

Engine will start, but will not move

John Deere X320 - starts but won't move [ 1 Answers ]

Lever in rear is engaged. Doesn't appear to be the issue. Battery died, had charger on over the weekend but wouldn't take a charge. New battery installed and works to start but when you step on forward/reverse pedals you get no response. Thanks in advance.

View more questions Search