Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rheem Criterion 2 draft inducer blower not running
[ 0 Answers ]
Hello, I am having trouble with the Rheem Criterion 2 draft inducer blower not running. I have 2 green lights on the display. Can anyone help?
Bad connections on draft inducer blower
[ 0 Answers ]
I have a Bryant Plus 80 furnace. Every once in a while it stops working. If I wiggle the wires under the draft inducer motor, the fan comes on and the furnace works great. I only had to do it this a couple of times last winter but already, as the weather is turning cold, I need to do almost...
How do I find a source for replacement furnace draft inducer for rheem criterion II
[ 2 Answers ]
I have A Rheem Criterion II Model RGLH-10EBRJR and I've been told I need to replace the draft inducer because of hairline cracks in the plastic housing. I looked at Rheem web site and no help there. How/where can I find a replacement part? Estimate from repairman was in excess of $400 for part...
Furnace draft inducer blower problem
[ 3 Answers ]
Hello: I have a Goodman GMP100-5 furnace. I have a random problem that seems to happen more often when it is cold outside. The draft inducer blower will start up for only 1-2 seconds then will switch off causing the system to not turn on. If I manually reset the system off and on, the motor...
The Power Venter (aka Heat Inducer and Draft Inducer) will not start on Goodman.
[ 8 Answers ]
FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S View more questions Search
|