Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing condenser fan motor.
[ 1 Answers ]
How do I replace a four wire , brown, blue, black, And red emerson condenser fan motor model Number k55hxhrd-8822 with a four wire, brown, Brown/white, black, and white A.O. Smith condenser fan motor model number f48v61ao1
Carrier hvac fan motor is intermittent
[ 0 Answers ]
I have a HVAC carrier model 38cks. I have two of these units side by side, one for 1st floor, the other for the 2nd floor. I had to change the capacitor on the same one a year ago… the top of the capacitor was expanded outward, like a can of soda that was about to explode. Unit has worked...
Replacing condenser fan motor
[ 1 Answers ]
I had water dripping into the condenser now the stop running,is it just replacing the fa motor,is more to it.
Replacing condenser fan motor
[ 2 Answers ]
The condenser fan motor on my "york" unit locked up. I replaced the motor but the new motor stops working after about 20 minutes. The condenser continues to work but obviously overheats because the fan is not working. The only difference between the old motor and the new one is the RPM. The new...
Replacing a 1990 Emerson Fan Motor
[ 3 Answers ]
I am replacing a 1990 Emerson Fan Motor (1/3 hp,1075 rpm, ccw) for a home air conditioning unit with a 2007 Dayton replacement motor (4M206G) and need help with the wiring. Original Emerson has Yellow, brown, and black wires. New Dayton has brown, brown/white stripe, black, and purple wires, and a... View more questions Search
|