Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Synchron zone valve replacement parts
[ 7 Answers ]
I have had two heat/air conditioning guys out to check my unit and they both said that my zone damper needs to be replaced. Apparently I have two for dual control. I have one with a part # that reads 645 24V 60HZ 6W 60 RPH 37944L-6 9218 The name synchron is on the part. It would be great if...
Probem with Honeywell Synchron motorized valve
[ 4 Answers ]
I have a gas fired boiler that uses seven Honeywell Synchron valves for zoned heating. All the valves are model V8043E1012. One of the valves seems to be stuck in the on position regardless of the thermostat setting. Also, I noticed the slide switch (auto or manual) on the valve in question has...
Where to find the model number on my Honeywell Synchron zone valve
[ 5 Answers ]
Where to find the model number on my Honeywell Synchron zone valve. I think the Powerhead and/or motor has gone bad. I had no heat in my master BR this morning and after verifying the Thermastat was kicking in I went down and tried to check the valves. This is just 1 zone out of 5 (3 other...
I have a weil-mclain boiler. The zone valve opens but no heat in zone. What do I do?
[ 1 Answers ]
Have replaced the zone valve actuator, but it doesn't seem to be fixing the problem. What else can I do?
What does it take to slow a 120vac 60hz motor?
[ 3 Answers ]
What does it take to slow a 120vac 60hz motor? View more questions Search
|