Ask Experts Questions for FREE Help !
Ask
    lafloresta55's Avatar
    lafloresta55 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 12, 2013, 10:44 AM
    Install Honeywell Thermostat
    I'm installing a "Heat Pump" RTH3100C non-prog. Thermo. Replacing a T8411R,
    With letters G, C, R, Y, O, W2. The "RTH" letters are E, AUX, Y, G, O, L, R, B, C.
    My concern is the connection of the W2 wire on to the "RTH", and also the
    Instructions mention the E terminal of the "RTH" should be connected to the
    Aux by a piece of wire. Am I making sense?
    Daytona, Fl... age 77
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #2

    Aug 12, 2013, 06:12 PM
    Yes w2 goes to aux jumped to e. make sure to do the correct installer setup

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I install a Honeywell programmable thermostat? [ 1 Answers ]

How do I install a Honeywell programmable thermostat if the only wires I have coming out of my wall are red and black, and neither of them are labeled?

I am trying to install a honeywell RTH6350d thermostat, [ 0 Answers ]

There are only 2 existing wires, one red and one could be yellow or white.. which terminal do I connect them to?

How to install a Honeywell Thermostat [ 1 Answers ]

Hello, I purchased a home with a programmable Honeywell Thermostat Model RTH 7500D, however, the previous tenent took everything off the walls one of which is the thermostat. I can put it back but the wires are exposed and have no idea on what letter on the connector to install etc. I have four...

Install of Honeywell RTh221B thermostat [ 4 Answers ]

How do I install an Honeywell RTH221B thermostat?? I have a red, white and green wires on the old tthermostat. Where do the new terminals Y, G, Rh, Rc, and W connect to the old wires?? :)

Honeywell Thermostat Install [ 3 Answers ]

After an answer on this site I purchased a new thermostat today capable of central heat/cool and also for a heat pump. It is the Honeywell RTH6400. I currently have a White Rodgers (9510E7) rectangular thermostat. I am still having problems figuring which wires go where. Currently there are 8...


View more questions Search