Ask Experts Questions for FREE Help !
Ask
    wayne alderman's Avatar
    wayne alderman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 2, 2013, 10:28 AM
    Troybilt 12av565q711 how to replace drive cable
    I can't remember how to install replacement drive cable where to connect
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 6, 2013, 09:57 PM
    Hi,
    I will post the parts breakdowns for the machine.
    The lever #8 in the drawing is the clutch lever on the transmission so the lower end of the cable fastens there. Cannot from the drawing, it is not possible to identify where the outer casing fastens.
    The control lever assembly #8 in the second drawing may or mat not have a small cover on the bottom side that allows you to hook the end of the cable into the lever and the outer casing will have a raised ring around it the will fit into one of a number of slotted areas near where the cable assembly exits the control. Normally you start with the one nearest the lever. If it has an adjustment thumbwheel, then only slot may be there. It may be that the whole thing has to be opened to fasten the cable. Should be #2 Phillips screws and it will be trickier.
    Peace,
    Clarke
    Attached Images
         
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drive cable on Troybilt self propelled lawn mower [ 1 Answers ]

I have a 21" 7hp troybilt mower and am trying to replace the drive cable. The old one broke off underneath the deck where it attached to the deck. The problem I have is getting my fat fingers in there to thread the new cable in and hook it up to the bracket on the underside of the deck. Still...

Replace drive cable troy-bilt mower 836 series [ 0 Answers ]

How to replace the drive cable on my troy-bilt self propelled mower 836 series. I know how to attach to handle but not sure how to attach to the bottom

Drive belt routing for Troybilt 13BX60TG766 [ 3 Answers ]

Old belt broke, so no reference. I found the general routing on the web no problem, but it lists no procedures to follow as far as what to remove under the mower etc. I had it routed pretty much per the diagram, but the belt was rubbing on a bolt head. Looks like I need to loosen the steering nut...

Need a drive belt diagram for a troybilt super bronco [ 4 Answers ]

Need a drive belt diagram for a troybilt super bronco?

Replace Drive Cable on Weedeater Featherlite Plus Trimmer? [ 1 Answers ]

How do I replace the drive cable on my Weedeater Featherlite Plus Curved shaft Trimmer? I bought a plastic & Metal blade head for it to cut heavy brush and I think it was too heavy for my Featherlite trimmer. The drive cable snapped or disconnected inside the head or motor after about 15...

View more questions Search