 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Dsc PC 1832
I am installing a DSC PC 1832 alarm panel the alarm system works normal though the exiting cycle but when the entry door is opened the siren sounds rather than the keypad until the code is entered. The alarm memory shows no alarm and none is reported to the central station. The alarm and keypad works normal on a test bed
Any suggestions? |
||||
Check out some similar questions!
I'm having issue trying to get my installer code to work again. It worked as I was programming everything. As soon as I was about done. My installer code didn't work anymore. I think it might of have locked it's self out. But I never locked the installer code. I did a panel hardwire rest and it...
Where can I purchase the DSC brand of products of security systems.
Hi…I am currently replacing an old DSC PC 2525 home security system with a newer PC 1832. The trouble is… I am having difficulty even getting to first base programming this unit Is there someone on board who can walk me through this? This is what I have: 2 new keypads.. a pk 5501 at the...
Recently I have installed dsc 1832 security system . So far I have done good. But I can not solve my smoke detector problem . Smoke detector is FSA-410BT 4-wire . I have run cat5 wire for this connection . The reason is simply - I had left over cat5 . I have used Bro for 12v+ and BLU for GND....
I have a DCS 1832 and I am getting intermitting open. The wires at the control panel are tightly secured. It could be a resistor problem and I am unsure of to what the resitor value should be for the zones. Can you help?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
