Ask Experts Questions for FREE Help !
Ask
    prathapreddya's Avatar
    prathapreddya Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 24, 2013, 09:27 PM
    Why 0.02% toluene in hexane used in uv calibration
    Why 0.02% toluene in hexane used for wavelengths 266,269 nm in uv calibration

Check out some similar questions!

Why we use toluene for resolution of UV calibration [ 0 Answers ]

Why we use toluene for resolution in UV calibration

Why does KMnO4 become green when added to n-hexane? [ 1 Answers ]

Earlier, we had an experiment to test if a compound is saturated or not. We did this by adding potassium permanganate to each of our samples(n-hexane, cyclohexane,toluene, and acetylene). Ideally, if the compound is unsaturated, the purple color of KMnO4 should turn into brown since the reaction...

Hexane reacts with Oxygen [ 1 Answers ]

Hexane (C6H14) reacts completely with oxygen (O2) to make carbon dixode and water. Balance the equation. How many mole of oxygen are consumed per mole of hexane burned?

Toluene used on a rotary evaporator [ 1 Answers ]

Why does fat dissolve in toluene but water does not when put on a rotary evaporator? any help would be great.thanx


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.