Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Working with Brazilian Cherry planks
[ 4 Answers ]
I am in the process of making a table top from 3 1/8" Brazilian Cherry planks that I got from Lumber Liquidators. The same material one would use for hardwoor floors. The table will measure 53" square with a removable center piece which is 16". I have glued the three sections that make up the...
Plumbing tools calking tools for lead (new)to buy?
[ 2 Answers ]
Problems with laminate flooring/planks peaking
[ 3 Answers ]
We recently had some shaw 8mm laminate flooring installed. Very soon after the install, a few boards starting peaking up on the ends. I thought it was maybe touching a wall, but I read that the planks on both sides would push up against each other. We had the installer out and he says it's the...
Laminate Flooring Planks Not Flat
[ 3 Answers ]
Hi there I am laying a laminate floor myself. The planks came wrapped and pakaged they are not flat. When taken from the pakaging there is a slight bow/sag in them. Will this affect the laying of the floor? Will it flaten out? Any comments or suggestions would be appriciated. Thanks View more questions Search
|