Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What is the amp rating for a 75' run of 10-3 romex wire
[ 15 Answers ]
What is the amp rating for a 75' run of 10-3 romex wire?
Romex wire/amp issue
[ 3 Answers ]
I am replacing a 30" kitchen range with a new 48". The existing wiring is approximately 30' of romex NM-B 8/3 on a 40 amp breaker. The new range requires as follows: Maximum connected load: 10.2 kW for 48". Required power supply: 240V/208V/50A/60Hz for 48". Minimum supply wire size: L1 and...
Romex 12-2 temp rating?
[ 2 Answers ]
Hello. My first visit to this very informative site. I have a question about wiring in a pole building. I'm using 12-2 Romex simpull on a 20 amp outlet circuit along the walls. My question is, will heat in the summer months on the metal siding be hot enough to damage the wire if it is stapled on...
SEU & Romex
[ 1 Answers ]
Can SEU and NMB cable be uses interchangely for a 60 amp, 240 volt circuit. View more questions Search
|