Ask Experts Questions for FREE Help !
Ask
    hmpbrig's Avatar
    hmpbrig Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 22, 2013, 12:13 PM
    Picture of 1989 intertherm burner plate
    Where can I purchase a burner plate for a 1989 intertherm furnace?it is a holley park mobile home.there is a number on the plate.b-730
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Apr 22, 2013, 01:49 PM
    I know what you need but I have not been able to buy one for service work for years now. What I had done on the last plate I needed to replace was to get one made by a local black smith shop. He makes stuff for horses and other jingle jangle metal type work. I took the old parts along with a drawing of what I wanted and in 2 days he had it done. I also believe he was a bit cheaper than buying a new one from Nordyne. Check around for someone local to make one for you. Good luck.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Apr 22, 2013, 01:54 PM
    Here is a link to a good picture of one.


    BestBuyHeatingAndAirConditioning.com OEM Replacement Furnace Burner Target Assembly (Nordyne, Intertherm)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hi: I have an Intertherm mgha-056abfc-02; burner ignites but blower won [ 1 Answers ]

Hi: I have an Intertherm mgha-056ABFC-02: burner ignites (thermostat ok) but blower doesn't come on, so I guess gets too hot and burner goes off. My guess is switch that has '626337B' prilnted on it? Blower works when gets electricity. If my guess is correct, where best buy switch? Um, how...

Intertherm furnace burner keeps turning off after about 6 seconds. [ 1 Answers ]

My intertherm furnace keeps turning off after about 6 seconds. It'll be off for about a minute then will burn again for six seconds and stop. This keeps repeating.

Intertherm mobile home furnace gas valve/burner [ 9 Answers ]

I am the third person attempting to repair a problem with a Intertherm 1155 natural gas furnace, manufactured in '73. The problem is, that the pilot extinguishes when the burner shuts down. Someone else has replaced the gas valve with a universal type. The vent tube is in place, in the pilot...

Intertherm gas furn pilot but no burner blower sticks [ 1 Answers ]

I have a mobile home with intertherm gas furn. Pilot is lit but burner will not fan is stuck and outdoor ac unit comes on whet tstat is set for heat

Intertherm model #1265 burner won't fire up [ 2 Answers ]

Pilot is lit,blower works,stat is good,burner will not kick in

View more questions Search