Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Electrical answers
[ 3 Answers ]
I have run 2 sockets from a junction box with 2.5 cable,when I plug an appliance into one socket it works,but when I plug into the second socket both the live and nuetral become live and the appliance does not work the sockets are both the same and new
Electrical answers
[ 0 Answers ]
Hi wonder if anyone can help? I'm unable to upgrade my current consumer unit at the moment but acknowledge it is very old style wire fuse ceramic fuse carrier style with no mcb or rcd protection. What I was wondering is if I was to fit a rcd to add some sort of protection to the house would I also...
Electrical questions answers
[ 2 Answers ]
What are the consequences of using an AC voltage rated switch and wire for DC voltage rated equipment on a very small load 12 volt DC automotive windshield washer motor?
Electrical questions answers
[ 2 Answers ]
My mother lives in an older house. Some of the outlets are wired with 14/2 w/earth gnd (3 pronged outlets). Some are wired with 14/2 w/o earth gnd (2 pronged outlets). My mother uses a lot of "cheater plugs" (adapts 3 pronged cords to 2 pronged outlets). This leaves the appliance cases...
Electrical Questions Answers
[ 1 Answers ]
Whole house 200amp generator with transfer switch do the neutral and ground wires for the circuits in panal box have to be separated View more questions Search
|