Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How can I wire 2 lights controlled by a single switch with the power to the switch?
[ 4 Answers ]
Need a wiring diagram showing how to wire 2 lights controlled by a single switch where the power comes in to the switch box.
I replaced pull switch lights with recess but the wall switch won't turn off the light
[ 2 Answers ]
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.
Two lights operated by one switch
[ 1 Answers ]
Can you tell me how to wire a one switch, two light setup. There is a red black and earth from the ring, and a red black yellow blue and earth from one light to the other.
Converting pull switch lights to wall switch
[ 3 Answers ]
I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the... View more questions Search
|