Ask Experts Questions for FREE Help !
Ask
    lisawishnok's Avatar
    lisawishnok Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 12, 2013, 08:19 AM
    Ask a mechanic free
    Hi -

    When I replace my crankshaft position sensor, do I need to calibrate the car's computer or can I just install the sensor and go?

    1997 Honda Passport

    Thanks
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 12, 2013, 08:47 AM
    Just install and clear the old code, if necessary, with a code reader or scan tool.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ask a honda mechanic for free? [ 2 Answers ]

I have broken lugnuts on a single tire a total of three times them last time they checked the suspension and stated everything looked OK. Even though they changed the lugnuts every time I break my tire makes a grinding clicking noise and no one can figure out what's wrong! Have spent over 200...

Ask honda mechanic free [ 1 Answers ]

I'm driving a 2001 honnda accord coupe 2.4 (4 cylinders). My question is can I replace the 2.4 to a 3.0 v6. If yes along with the engine what other changes should be made.

Ask a honda mechanic for free [ 2 Answers ]

So I hit a pot hole and my front passenger tire started wabbeling. I can't go over thirty or it is real bad. I replaced the tire and noticed the cv boot is now ripped. The new tired didn't help what can it be? It is a 99 acura tl

Ask a mechanic for free [ 1 Answers ]

I have a 1998 Honda Accord Ex when I push the buttons to turn on the Air or Heat no lights come on only air will blow, Air conditioner or Heater want work , just blow air. Have checked all my fuses, what am I missing.

Ask a Honda mechanic for free? [ 0 Answers ]

How to install sirius radio into 2008 honda ridgeline

View more questions Search