Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is equipment cheaper to run on 480 VOLTS OR 220 VOLTS 3 phase
[ 1 Answers ]
I have 2 refrigeration compressors. One 5 h.p. 480 volts, 3 phase @ 4.5 amps. One 5 h.p. 230 volts 3 phase @ 20 amps. Which one will cost less to run assuming electric costs are same?
120 volts at heater element
[ 4 Answers ]
I have a Kenmore Elite Dryer, everything works fine but NO HEAT. I had an appliance repair man come out 3 times but as soon as he left, the heat never came on. He changed the heater element first, all thermostats and thermister... I went and got the wiring diagram, everything checks out OK but only...
Stratmando, thanks I don't have 120 volts between Hot and Neutral. I have 120 volts
[ 2 Answers ]
Stratmando, thanks I don't have 120 volts between Hot and Neutral. I have 120 volts between hot and ground Also have 120 volts between Neutral and ground How far in the wiring do these types of problems reach into the wall?
Replace a water heater 120 element with a 220 element with proper wiring
[ 4 Answers ]
Can I use a 220 heating element in a 110 water heater as long as the wiring is for 220. We had a 40 gal water heater 220 volts in a weekend cabin with one shower a complete over kill. Want to replace with a 20 gal 110 water heater but to take advantage of the 220 wiring can I just swap out the...
220 volts to 120 volts
[ 5 Answers ]
I currently have a 220 volt/30 amp service to an electric washer/dryer combination. The washer/dryer broke down and I will be switching to individual units each requiring a 120 volt/15-20 amp supply suggesting a separate circuit. The current unit had a four wire configuration (2 hot -... View more questions Search
|