Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan will not work after replacing 3 speed pull chain switch
[ 129 Answers ]
I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...
Hampton Bay ceiling fan speed problem
[ 3 Answers ]
My Hampton Bay ceiling fan (Delano model) was professionally installed and worked as advertised. Last time I turned it on, however, I found it only worked on high speed. The remote will turn it on/off and reverse it. I hear something from the fan (a click) when I push the "slow" button, but it...
Hampton Bay Ceiling Fan - Pull Chain
[ 6 Answers ]
Ok, so I got a little huffy last night holding the baby and toys while trying to find the number online to call ahead for seating at Texas Roadhouse. I pulled too hard on the fan pull chain and sure enough it broke off at the start of the chain, I was sad to see the connector piece attached to...
Hampton Bay Ceiling Fan - Light Chain came out
[ 3 Answers ]
OK, this seems really simple but I can't seem to figure it out. I have a pretty basic Hampton Bay ceiling fan in my bedroom. In the center, there is a small hole with a chain coming out for the light. One day I pulled it and it came off the fan. I opened the fan and see the wiring, etc. but...
Hampton Bay Ceiling Fan 3-speed failure
[ 1 Answers ]
One of our 3 speed fans suddenly only has one speed-slow. Any suggestions or comments to help us. It's HOT View more questions Search
|